Cart

AC CHARGER
AC Charge Current
AC Input Voltage 230 VAC
Selectable Voltage Range 90 – 280 VAC
Frequency Range 50 Hz/60 Hz (Auto sensing)

BATTERY
Battery Voltage 48 VDC
Battery Type(s) Lithium / Lead-acid
Floating Charge Voltage
Overcharge Protection

 

DIMENSIONS & WEIGHT
Height 485mm
Width 330mm
Depth 135mm
Weight 12 kg

Shoto 5.12kwh Lithium-Ion Battery with more than 5000
cycles with 90% DOD and 10+ years design life.
Rack Mounted structure design reduces installation
time and cost

HiKU6 HIGH POWER MONO PERC MODULE. Up to 4.5 % lower LCOE, Up to 5.6 % lower system cost. Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation. Compatible with mainstream trackers, cost effective product for utility power plant. Minimizes micro-crack impacts thanks to the multi-busbars on the module. Heavy snow loads of up to 5400Pa and increased wind load up to 2400Pa. Length: 2,278 mm Width: 1,134 mm Weight: 27.6 kg 25 year power output warranty 12 year product warranty

Hoselect Lithium Ion Battery Module – Wallmount – 48V – 4.8kwh

New / 1st life – LiFePO4 cells Low environmental impact Superior thermal stability High peak power rating Long cycle life Intelligent Battery Management System (BMS) BMS communication compatible with: Sacolar Inverters Growatt Inverters Sunsynk Inverters Deye Inverters Victron Inverters SMA Inverters Solis Inverters Goodwe Inverters RS485 BMS communication CAN bus Parallelable up to 15 battery packs to a total of 72kWh Communication between the battery and the charge controller ensures a long battery life. Specifications

 

Combination method 15S Rated capacity Typical: 105 Ah Minimum: 100 Ah Mean operation voltage 48.0-49.5 V Voltage at end of discharge 47 V Charging voltage 51.6 V Internal impedance (measured at AC 1kHz after 50% charge) <30 mΩ Standard continuous charge current 20A – 40A Maximum continuous charge current 100A (controlled by BMS if comm. used) Maximum continuous discharge current 100A Operation temperature (at 60±25% R.H) Charge: 0~45 °C Discharge: -20~55 °C Storage temperature (at 60±25% R.H) less than 12 months: -10~35°C less than 3 months: -10~45°C less than 7 days: -20~65°C Dimensions 442 x 480 x 221.5 mm Weight 42kg (prismatic cells) Volumetric specific energy 104Wh/L Gravimetric specific energy 87 Wh/kg

Cycle life: Battery tested for the following:

Depth of discharge Cycles @ 25°C and 1C (100A) 80% 3500 85% 2500 90% 1250 95% 500

Communication: The BMS has three RS485 ports one RS232 port. Two RS485 ports are used for the parallel connection of multiple batteries. The RS485 and CAN ports are used for inverter-battery communication. The RS232 port allows for real-time monitoring of the following:

Total battery bank capacity Individual cell capacity Battery bank current Environment temperature Cell temperature Charging/discharging current Cycle count estimate

Powercube series products with its modular design concept, enables the highest flexibility both for rack mounted and container based constructions, giving the flexibilities for customer to deploy the system. Configurable from units of 5 – 18 modules per system, the system can supply 240 – 864V for high Voltage applications.

Modular and Scalable 5 – 18 modules per rack and up to 6 racks in parallel Flexible BMS voltage range From 240VDC to 864VDC LiFePO4 technology For safety and long cycle life High System Safety BMS has charge, current and temperature protection Flexible configuration options  Rack mounted or container-based systems

Battery Specification:

Weight:32 kg Battery Type:Lithium Ion Nominal Energy:3552 Wh Depth of discharge:90.00 % Voltage:48 V Continuous Discharge Rate (Normal Use):1776 W Maximum Discharge Rate (5 Minutes):3552 W Surge Discharge Rate (15 Seconds):3552 W Maximum Charge Rate (5 Minutes):3552 W

Each Battery module comes with 1 x Communication Cable and 1 x Orange Power Cable

NB. Please note: A BMS unit and external cable kit is required for each individual stack of batteries.  A minimum of 5x battery modules is required for BMS operation. For installations with two BMS units and more an MBMS is required. You can register the Pylon Powercube for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the ‘sign up battery’ page. Get Specsheet here